Barton GunWorks Precision engineered Picatinny rails, UK designed for owners who wish to achieve the most accuracy from their scope and rifle set-up. Our affordably-priced rail is a true MIL-STD-1913 design, extends the length of the action and features an inclined base.

So what’s different about our rails?

Many picatinny rail designs currently on the market are not tight enough and result in the scope moving which can be highly frustrating when zeroing. It’s like putting a very expensive vase on a wobbly table.

This new design extends the mounting length, allows easier mounting for the perfect eye relief of longer modern scopes as well as night vision equipment and delivers better use of the elevation turret to shoot at longer distances thanks to the inclined base.

Each Barton Gunworks picatinny rail also features an inclined base at 10MOA (except the 455/452, Sako FinnFire2 & Anschutz bases), allowing for better use of elevation with your scope, but not so inclined that stalking scopes or optics with less adjustment can’t still be zeroed at 100 yards.

All our picatinny rails are made in the UK.

Barton GunWorks picatinny rails offer the best combination of maximum support and alignment. As you can see from the profile, your scope rings are supported not only on the uppermost edges but from underneath as well, just as the original specifications intended. The means your scope rings must be aligned to the rail on which they are fitted.

Most of our competitors rails tend to use this type of profile. With this type of design you have minimal support from the upper surfaces of the rail only. This in turn means that your rings are likely to be slightly out of alignment too. Of course, machining this sort of profile is much simpler and cheaper to achieve.

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. This rail has been designed to fit the Browning T-Bolt range of rifles.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. This rail has been designed to fit the CZ455 range of rifles, however, it will also fit the legacy CZ452 range too.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

This rail has been designed to fit the CZ457 range of rifles.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. This CZ Picatinny rail also features an inclined base at 10MOA allowing for better use of elevation with your scope.

£79.99

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.
These Sako Finnfire2 Picatinny rails are set to 0MOA.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.
These Sako 75/85 Picatinny rails are set to 0MOA.

£79.99

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.
These Sako 75/85 Picatinny rails are set to 20MOA.

£79.99

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

These Tikka 595 Picatinny rails are set to 0MOA.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

These Tikka 595 Picatinny rails are set to 20MOA.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.
These Tikka T1x Picatinny rails are set to 0MOA.

£79.99

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Designed to fit the Tikka T3/T3x perfectly. Extended mount. 0MOA. Full profile Picatinny. Supplied with 4 torx screws and driver.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Designed to fit the Tikka T3/T3x perfectly. Extended mount. 10MOA. Full profile Picatinny. Supplied with 4 torx screws and driver.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Designed to fit the Tikka T3/T3x perfectly. Extended mount. 20MOA. Full profile Picatinny. Supplied with 4 torx screws and driver.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Barton Gunworks range of Remington 700 Picatinny rails also feature an inclined base at 10MOA allowing for better use of elevation with your scope.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Barton Gunworks range of Remington 700 Picatinny rails with base set at 0MOA.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Barton Gunworks range of Remington 700 Picatinny rails also feature an inclined base at 20MOA allowing for better use of elevation with your scope.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. Our Savage centrefire Picatinny rail also features an inclined base at 10MOA allowing for better use of elevation with your scope.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

£79.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish.

Our Howa 1500 Picatinny rail also features an inclined base at 20MOA allowing for better use of elevation with your scope.

£79.99Add to basket

Replacement screws for your picatinny rail.

£5.99Add to basket

Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each mount is anodised with a very high quality satin black finish.

A medium height 30mm mount

£89.00